HIKROBOT MV-CB016-10GM-S-W(POE): Compact PoE Global Shutter Camera for Machine Vision

As industrial automation continues to develop, manufacturers increasingly rely on compact machine vision systems to improve product inspection, assembly verification, and production quality control. In applications involving moving components, small installation spaces, and continuous image acquisition, selecting the right industrial camera is an important part of system design.

Traditional camera installations may require separate power and data cables, additional mounting space, and carefully planned electrical connections. For compact OEM equipment and embedded vision systems, these requirements can increase integration complexity.

The HIKROBOT MV-CB016-10GM-S-W(POE) is a monochrome GigE board-level industrial camera designed for machine vision applications. Equipped with a Sony IMX296 CMOS sensor, Global Shutter imaging, and a 1440 × 1080 resolution, it provides an image acquisition solution for applications that require compact hardware and reliable industrial communication.

One of its notable features is Power over Ethernet (PoE) support. When used with a compatible PoE power source, the camera can receive power through its Ethernet connection, helping simplify cable routing in suitable machine vision installations.

This article examines the camera's technical characteristics, the engineering benefits of its imaging and communication technologies, and a hypothetical application involving automated small-component inspection.

The MV-CB016-10GM-S-W(POE) belongs to HIKROBOT's CB Series of board-level industrial cameras.

Board-level cameras are designed for integration into equipment where space, mechanical arrangement, and customized system architecture are important considerations. Compared with conventional enclosed industrial cameras, their board-level structure provides equipment designers with greater flexibility when planning camera placement and mechanical packaging.

The MV-CB016-10GM-S-W(POE) uses the Sony IMX296 CMOS sensor and captures monochrome images at a resolution of 1440 × 1080 pixels. Its Global Shutter architecture is suitable for evaluating applications involving moving objects, while its Gigabit Ethernet interface supports image transmission to a compatible industrial computer or vision-processing system.

The model also supports PoE power delivery, subject to the required compatible power source and connection configuration.

• Sony IMX296 CMOS image sensor

• 1/2.9-inch sensor format

• 3.45 μm × 3.45 μm pixel size

• 1440 × 1080 image resolution

• Monochrome image acquisition

• Global Shutter imaging

• Maximum frame rate of 65.2 fps

• Gigabit Ethernet interface

• PoE power support

• GigE Vision V2.0 and GenICam compatibility

These characteristics make the camera worth evaluating for compact OEM equipment, embedded vision systems, and automated inspection applications.

The following table summarizes the publicly available technical information for the MV-CB016-10GM-S-W(POE).

Technical note: The specifications above are based on publicly available CB Series documentation and model-specific product information. Confirm the latest official datasheet for the exact ordering code before final procurement, particularly for the connector, lens mount, mechanical dimensions, I/O pinout, and PoE implementation.

Image quality is influenced not only by camera resolution but also by the way the sensor captures moving objects.

The MV-CB016-10GM-S-W(POE) uses Global Shutter technology. Unlike Rolling Shutter sensors, which expose different image rows at different times, a Global Shutter sensor captures the image across the sensor simultaneously within the exposure cycle.

This characteristic can be valuable in industrial applications where products move during image acquisition.

When a moving object is captured using a Rolling Shutter camera, different parts of the image may correspond to slightly different capture times. Depending on object speed and motion direction, this can produce geometric distortion.

Global Shutter imaging helps reduce this type of rolling distortion and is therefore useful for applications involving moving components or conveyor-based inspection.

Industrial vision systems often need to identify the position, orientation, or presence of a component before another operation takes place.

A Global Shutter camera can provide a more consistent image geometry for these tasks when objects are moving during capture.

Potential applications include:

• Conveyor-based component inspection

• Robotic pick-and-place positioning

• Assembly verification

• Electronic component recognition

• Automated part sorting

• Object presence detection

Global Shutter does not eliminate all motion blur.

If an object moves significantly during the exposure period, its image may still become blurred. Engineers must select an appropriate exposure time and provide sufficient illumination according to the actual object speed and inspection requirements.

The camera's published exposure information includes an ultra-short exposure mode and a standard exposure mode. The applicable settings should be verified in the manufacturer's documentation and configured through compatible acquisition software.

One of the key characteristics of the MV-CB016-10GM-S-W(POE) is its support for Power over Ethernet.

PoE technology allows compatible equipment to transmit electrical power and data through an Ethernet connection. In an industrial camera installation, this can reduce the need for a separate camera power cable when the selected camera configuration and power source support the same PoE arrangement.

In a conventional installation, the camera may require separate connections for power and Ethernet data.

With a compatible PoE arrangement, power and data can share the Ethernet connection. This may simplify cable routing and help equipment designers organize compact camera installations.

The camera can be evaluated for integration with a compatible PoE switch, PoE injector, or other supported PoE power source.

The selected equipment must meet the camera's actual PoE requirements. A standard Ethernet port without PoE power delivery cannot automatically power a PoE-enabled camera.

For machine builders and OEM manufacturers, PoE support may offer several practical benefits:

• Fewer separate power connections

• Simplified cable routing

• Flexible camera placement

• Cleaner equipment wiring

• Convenient integration with compatible Ethernet infrastructure

• Easier organization of compact embedded vision systems

PoE does not remove the need for proper electrical protection, grounding, cable selection, and network planning.

Before installation, engineers should verify the camera's PoE requirements, supported power source, connector arrangement, and cable specifications.

Application scenario: Automated inspection of small metal and electronic components on a moving production conveyor.

This is a hypothetical engineering application designed to illustrate how the MV-CB016-10GM-S-W(POE) could be evaluated in an industrial vision system. It is not a documented customer deployment or a verified performance test.

A manufacturer operates a conveyor system that transports small components through an automated inspection station.

The inspection system needs to determine whether each component is present, correctly oriented, and positioned within the required inspection area.

Depending on the product and quality criteria, the system may also need to identify visible surface contamination or selected assembly defects.

The camera installation space is limited, and the equipment designer wants to minimize the number of separate cables routed to the inspection module.

The MV-CB016-10GM-S-W(POE) can be considered for this application because of its compact board-level structure, monochrome image acquisition, Global Shutter technology, and GigE communication.

Its 1440 × 1080 resolution provides an image containing approximately 1.56 million pixels.

Whether this resolution is sufficient depends on the camera's field of view, working distance, optical magnification, object dimensions, and minimum defect size.

The camera should therefore be tested with representative components before the final system design is approved.

A possible machine vision architecture includes:

1. Industrial camera: HIKROBOT MV-CB016-10GM-S-W(POE) for image acquisition.

2. Lens: A compatible lens selected according to the sensor format, field of view, and working distance.

3. Lighting: LED illumination selected to provide suitable contrast on the component surface.

4. PoE power source: A compatible PoE switch or injector that meets the camera's power requirements.

5. Industrial computer: A host computer for image acquisition and processing.

6. Vision software: HIKROBOT MVS or another compatible machine vision application.

7. PLC or controller: Receives inspection results and coordinates conveyor or rejection operations.

The exact architecture should be determined by the required inspection cycle, network topology, processing workload, and machine control design.

As components move through the inspection station, the camera captures images according to the configured acquisition mode.

A suitable trigger arrangement may be used to coordinate image acquisition with the conveyor or an external sensor.

Global Shutter imaging can help maintain consistent geometric capture of moving components, while appropriate exposure time and lighting help reduce motion blur.

The image-processing software can then analyze selected regions of interest to identify the presence, orientation, or visual characteristics of each component.

A typical inspection sequence may include:

• Image acquisition

• Image preprocessing

• Region-of-interest definition

• Feature extraction

• Position or orientation analysis

• Presence or absence verification

• Inspection result generation

If a component does not meet the defined inspection criteria, the system can send a result to the PLC or another control device.

The PLC may then coordinate a rejection mechanism or notify the operator, depending on the production line design.

Actual detection capability must be established through testing with representative samples, lighting conditions, and production speeds.

In this hypothetical design, a compatible PoE power source supplies power to the camera through the Ethernet connection.

This can help reduce separate wiring within the inspection module and simplify the equipment layout.

The industrial computer and camera should be connected through a suitable network architecture that provides the required bandwidth and stable image transmission.

For multiple-camera systems, network capacity and aggregate image data throughput must be calculated rather than assumed.

A machine vision camera cannot achieve reliable inspection performance through sensor specifications alone. The lens and illumination system are equally important parts of the imaging solution.

The lens should be selected according to:

• Sensor format

• Field of view

• Working distance

• Required object detail

• Lens resolution

• Distortion requirements

• Available installation space

• Mechanical mounting compatibility

The exact lens mount and mechanical configuration for the MV-CB016-10GM-S-W(POE) should be checked against the official model documentation.

Do not assume that every M12 or C-mount lens is compatible without confirming the actual camera configuration.

The MV-CB016-10GM-S-W(POE) is a monochrome camera.

Monochrome imaging can be suitable for inspection tasks where the important information is based on intensity, shape, edges, contrast, or surface features rather than color differences.

Potential inspection tasks include:

• Component presence detection

• Edge and contour analysis

• Surface contrast inspection

• Part orientation verification

• Selected dimensional measurements

If color information is essential to the inspection task, a suitable color camera should also be evaluated.

Different materials and surface finishes require different lighting arrangements.

Possible illumination methods include:

Lighting should be tested using actual production samples. Reflective metal, transparent materials, and dark surfaces may require different illumination configurations.

The MV-CB016-10GM-S-W(POE) is listed with GigE Vision V2.0 and GenICam compatibility.

These standards are important in industrial machine vision because they support communication between compatible cameras, acquisition software, and image-processing systems.

GigE Vision is a machine vision communication standard based on Gigabit Ethernet technology.

It supports image transmission and camera control within compatible machine vision systems.

The camera's Gigabit Ethernet interface provides a network-based connection to the host computer.

GenICam provides a standardized framework for accessing and configuring camera features through compatible software.

Depending on the camera and software implementation, users can configure parameters such as exposure, gain, triggering, and image acquisition settings.

HIKROBOT MVS software can be used for camera discovery, configuration, image acquisition, and integration development.

Before selecting third-party vision software, confirm its GigE Vision and GenICam compatibility with the exact camera model and firmware version.

A basic integration process may include:

1. Install the compatible camera software and drivers.

2. Connect the camera to a suitable Gigabit Ethernet network.

3. Provide power using the supported PoE arrangement or another manufacturer-approved method.

4. Configure the camera's network settings.

5. Adjust exposure, gain, and triggering parameters.

6. Verify image acquisition and transmission stability.

7. Connect the image-processing application.

8. Integrate inspection results with the PLC or machine controller.

9. Validate the complete system under production conditions.

Choosing between a board-level camera and a conventional enclosed camera depends on the mechanical and environmental requirements of the machine.

The board-level structure of the MV-CB016-10GM-S-W(POE) may be beneficial for OEM equipment where camera placement and packaging need to be customized.

However, additional mechanical protection and appropriate installation planning may be necessary, particularly in environments exposed to dust, liquid, vibration, or accidental contact.

The MV-CB016-10GM-S-W(POE) can be evaluated for a range of industrial machine vision applications.

Monochrome image acquisition can support the inspection of selected electronic components, including presence detection, alignment checks, and visual verification.

Global Shutter imaging can be useful when capturing components moving along a conveyor, subject to appropriate exposure and illumination settings.

The camera may be integrated into equipment that checks whether selected components are present and correctly positioned before the next production operation.

Machine vision systems can use image information to estimate object position and orientation for compatible robotic applications.

Its board-level structure and PoE support make the camera worth evaluating for embedded vision modules and customized inspection equipment where space and wiring are important design considerations.

These are potential application categories. Actual suitability must be confirmed through optical, mechanical, electrical, and software validation.

Before purchasing the HIKROBOT MV-CB016-10GM-S-W(POE), engineers and procurement teams should confirm the following:

1. Verify the exact ordering model, including the POE suffix.

2. Confirm the Sony IMX296 monochrome sensor configuration.

3. Verify the 1440 × 1080 resolution.

4. Confirm the maximum frame rate of 65.2 fps under the intended operating mode.

5. Confirm Global Shutter operation.

6. Verify the PoE requirements and compatible power source.

7. Confirm whether an alternative DC power connection is required or available.

8. Check the GigE Vision V2.0 and GenICam software requirements.

9. Verify the actual lens mount and optical compatibility.

10. Obtain the mechanical drawing for equipment integration.

11. Confirm the connector pinout and digital I/O requirements.

12. Check the operating temperature and installation environment.

13. Verify driver and SDK compatibility.

14. Request the latest manufacturer datasheet before final procurement.

For replacement projects, also compare the existing camera's mechanical dimensions, mounting arrangement, network configuration, and software compatibility. A camera with the same resolution and interface is not necessarily a direct replacement.

The HIKROBOT MV-CB016-10GM-S-W(POE) is a monochrome GigE board-level industrial camera in the CB Series. It uses a Sony IMX296 CMOS sensor and supports PoE power delivery.

The camera uses the Sony IMX296 CMOS sensor with a 1/2.9-inch sensor format, 3.45 μm × 3.45 μm pixel size, and 1440 × 1080 resolution.

PoE allows a compatible power source to deliver electrical power through the Ethernet connection. This can simplify cable routing and reduce the need for a separate power cable in suitable installations.

Global Shutter captures image information across the sensor simultaneously within the exposure cycle. It helps reduce rolling distortion when imaging moving objects, although exposure time and illumination must still be selected to control motion blur.

The model is listed as supporting GigE Vision V2.0 and GenICam. It can be considered for use with compatible third-party machine vision software, subject to driver, firmware, and software compatibility verification.

The HIKROBOT MV-CB016-10GM-S-W(POE) is a compact monochrome board-level industrial camera designed for machine vision integration.

Its Sony IMX296 sensor, 1440 × 1080 resolution, Global Shutter imaging, 65.2 fps maximum frame rate, and Gigabit Ethernet interface provide a combination of features worth evaluating for automated inspection and embedded vision applications.

PoE support can further simplify camera power and data connections when the camera is connected to a compatible power source. Combined with its board-level design, this makes the model a potential option for OEM equipment manufacturers and machine vision system integrators.

Successful deployment still depends on selecting a suitable lens, providing stable illumination, configuring exposure and triggering correctly, and ensuring that the network and processing systems can handle the required image data.

For industrial buyers and system integrators, confirming the exact camera configuration and obtaining the latest technical documentation are essential steps before procurement.

If you are evaluating the HIKROBOT MV-CB016-10GM-S-W(POE) for an automation project, request its technical datasheet, verify PoE compatibility, and discuss the required optical and software configuration before final system integration.