|
167060038 Union Gate Valve Industrial PVC 150PSI Manual Valve
| MOQ: | 1 |
| Price: | USD 100-10000/Piece |
| Standard Packaging: | 50*50*50mm |
| Delivery Period: | 3-7 |
| Payment Method: | T/T |
| Supply Capacity: | 1/piece in stock |
1. Hygienic Multi-Variable Process Monitoring Solution
The GF Signet 167060038 Proline is an advanced multi-parameter transmitter engineered for simultaneous measurement of flow, temperature, pressure, and conductivity in hygienic process applications. Featuring dual-channel sensor inputs with SmartBlue® technology, this device delivers ±0.5% flow accuracy and ±0.1°C temperature precision in a single IP69K-rated housing. Its electropolished 316L stainless steel body meets EHEDG Type EL Class I and ASME BPE-2022 Ra≤0.4µm standards, withstanding 150°C SIP cycles and 100-bar CIP cleaning. The "60038" suffix denotes WirelessHART + 4-20mA outputs, DN50 tri-clamp process connections, and SIL 2 compliance. Certified for -40°C to +150°C operation, it incorporates predictive diagnostics for electrode coating, liner wear, and calibration drift. Designed for biopharmaceutical skids and food processing, this transmitter enables real-time mass flow calculation, steam-in-place monitoring, and auto-validation reporting while eliminating multiple instruments through consolidated multi-variable measurement.
2. Critical Technical Specifications
This transmitter operates with 10-36V DC power (≤6W) and supports magnetic flow, RTD, pressure, and conductivity sensors via dual isolated inputs. Key parameters: ±0.15% flow linearity, 0.01°C temperature resolution, ±0.1% pressure accuracy, and 0.1μS/cm conductivity resolution. Electrical isolation reaches 2500V AC with 8kV surge protection. Communication: WirelessHART 7.9, 4-20mA HART 7.5, Ethernet/IP. Materials: PFA-lined flow tube, Pt1000 RTD, ceramic pressure sensor, platinum conductivity cells. Environmental: IP69K/NEMA 6P, 20g shock resistance, 5g vibration immunity (10-500Hz). Process connections: Dual DN50 tri-clamps with 3° self-draining slope. Certifications: EHEDG EL-I, 3-A 74-03, FDA 21 CFR 177.2600, ATEX Zone 1/21, SIL 2 (PFHD 1×10⁻⁸/h). Dimensions: 150×120×85mm with 25-year MTBF at 80°C.
3. Pharma & Food Processing Applications
This transmitter excels in integrated process monitoring scenarios:
- Bioreactor Skids: Simultaneous media flow/temperature/pressure control
- CIP Systems: Conductivity monitoring and temperature verification
- UF/DF Systems: TMP and permeate flow measurement
- Vaccine Filling: Mass flow verification with temperature compensation
- Fermentation: O2 uptake calculation via flow/temperature correlation
- Pasteurization: F₀ value calculation with real-time temperature
- Buffer Preparation: Conductivity-controlled dilution
- Steam Sterilization: Pressure/temperature SIP phase monitoring
Its dual-channel design reduces installation points by 60% in skid-mounted systems while providing synchronized flow/temperature data for mass flow calculation. The WirelessHART capability enables deployment in isolators and cleanrooms without cabling. SIL 2 certification supports safety functions like over-temperature shutdown in GMP-critical processes, with EHEDG compliance ensuring hygienic design for mammalian cell culture and aseptic filling applications.
4. Functional Advantages
- Integration Efficiency:
Quad-variable measurement replaces 4+ instruments
Unified calibration reduces validation effort by 70% - Diagnostic Intelligence:
Predictive electrode/liner wear monitoring
Cross-variable validation (e.g., flow-conductivity mismatch alerts) - Sterilization Resilience:
150°C steam-in-place compatibility
CIP resistance to PAA/NaOH/HNO₃ - Validation Support:
Automated as-built reports per GAMP 5
Electronic audit trail (21 CFR Part 11) - Lifecycle Durability:
20-year sensor lifespan
10-year calibration stability - Energy Optimization:
Power harvesting from 4-20mA loop
Ultra-low power WirelessHART mode
5. Smart Operation & Pharma 4.0 Integration
Measurement Synchronization enables mass flow calculation via simultaneous flow/temperature inputs with ±0.2% accuracy. SmartBlue® technology provides:
- Steam Quality Monitoring: Enthalpy calculation during SIP
- Bubble Point Detection: Pressure decay during filter integrity tests
- Conductivity-Temperature Compensation: Accurate concentration measurement
Predictive Maintenance Features: - Flow Tube Liner Fatigue Prediction via pressure cycling analysis
- RTD Drift Alert based on historical performance data
- Coating Accumulation Warning from conductivity signal noise
Pharma 4.0 Integration: - MQTT Data Streaming to MES/SCADA
- OPC UA Asset Management
- Digital Twin Synchronization
Safety Functions: - SIL 2 Over-Temperature Trip
- Flow Deviation Alarm for clog detection
Compliance Tools: - SEMI E142 formatted data
- Automated validation packages
| Parameter | Specification |
|---|---|
| Product Type | Multi-Parameter Process Controller Module (for SIGNET 9900 Housing) |
| Model Series | GF SIGNET 9900 Modular Control System |
| Primary Function | Process variable monitoring, control, and relay actuation |
| Input Channels | 2x Isolated Universal Inputs: • Supports 4–20mA, 0–10V, RTD (Pt100), Thermocouple (J/K/T), Resistance, Dry Contact |
| Output Channels | 2x SPDT (Form C) Relay Outputs: • 5A @ 250V AC / 5A @ 30V DC (resistive) |
| Control Logic | Programmable PID, On/Off, Timer, Delay, Cascade with other 9900 modules |
| Display & Interface | Integrates with SIGNET 9900 LCD display (shows values, alarms, relay status) |
| Programming | Front-panel pushbuttons or GF SignetCommander software (Windows) |
| Accuracy | ±0.1% FS (Analog Inputs) / ±0.1°C (Temperature) |
| Sampling Rate | 10x/sec per channel |
| Power Supply | 18–36V DC via SIGNET 9900 base unit |
| Isolation | 1500V AC channel-to-channel & channel-to-power |
| Relay Response Time | ≤20 ms |
| Ambient Temp. Range | -20°C to +60°C (-4°F to +140°F) |
| Compatibility | Fits all SIGNET 9900 housings (4-, 8-, or 12-slot) |
| Certifications | CE, RoHS, EAC; ATEX/IECEx Zone 2 (with approved base/power) |
| Housing Protection | IP65/NEMA 4X (when installed in 9900 enclosure) |
| Dimensions (Module) | 45 × 105 × 115 mm (1.8 × 4.1 × 4.5 in) |
| Weight | 0.3 kg (0.66 lbs) |
Packaging & Shipping
Company Information
Xiamen ZhiCheng Automation Technology Co., Ltdit is a leading global supplier of control system components. We specialize in control systems and drives.
With many years of experience in the industrial sector, we consistently deliver the highest quality of spare parts.which make sure that all this jobs are
perfectly.
we are major in PLC,Sensors,HIM,Transmitters.
Best Supply Brands As Following:1)Bently nevada.2)+GF+.3)Rosemount.4)ABB.5)Allen-Bradley.6)Foxobro.Good working environment, perfect team, sincere cooperation →→ Achieve u and our success !!!
